<form id="v3v5j"></form>

<sub id="v3v5j"></sub>
<font id="v3v5j"></font>
<address id="v3v5j"></address>
<sub id="v3v5j"></sub>

      <sub id="v3v5j"></sub>

      <sub id="v3v5j"></sub>
      <thead id="v3v5j"></thead><address id="v3v5j"></address>
      1 咨询QQ:1328830372   2
      硫化物应力腐蚀开裂,硫化物应力开裂
      热搜:22SiMn2 EN10025-6 低合金高强钢板
      首页 公司介绍 今日现货 期货定轧 产品图片 新闻动态 售后服务 帮助中心 联系我们
      您现在的位置: 首页 > 新闻动态> HIC(R-HIC)钢  销售电话:0375-8201666 13837130337硫化物应力腐蚀,硫化物应力腐蚀破裂,石油炼制与化工
        联系我们
       联系人:李阳
       销售电话:0375-8201666
       传真:0375-8201702
       手机:18937583775
       QQ:1328830372
       
      nm600耐磨板价格低nm600耐磨板现货足

      硫化物应力腐蚀开裂,硫化物应力开裂,硫化物应力腐蚀,硫化物应力腐蚀破裂,石油炼制与化工,石油炼制与化工期刊,石油炼制,石油炼制工程,石油炼制工艺学

       
        新闻动态 石油炼制与化工期刊,石油炼制,石油炼制工程,石油炼制工艺学

      NACE标准中英文标准对照单

      发布日期:2015年11月21日 发布人:河南昌申钢铁有限公司 阅读原文

      1. NACE/ASTM G193-11a, Standard Terminology and Acronyms Relating to Corrosion
      NACE/ASTM G193-11a, 腐蚀有关的标准术语和缩略语

      2. RP0198-2004, The Control of Corrosion Under Thermal Insulation and Fireproofing Materials—a Systems Approach
      RP0198-2004, 保温和防火材料下的腐蚀控制系统方法的推荐做法

      3. RP0303-2003, Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control
      RP0303-2003, 管道热收缩套现场补口:施工、性能, 和质量控制的推荐做法

      4. RP0176-2003, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production
      RP0176-2003,海上钢质固定石油生产构筑物腐蚀控制的推荐做法

      5. MR0103-2005, Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments
      MR0103-2005, 腐蚀性石油炼制环境中抗硫化物应力开裂材料的选择

      6. TM0284-2003, Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking
      TM0284-2003, 管道和压力容器用钢抗氢致开裂能力的评定

      7. NACE MR0175/ISO 15156, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production
      NACE MR0175/ISO 15156, 石油和天然气工业用材料-含硫化氢环境油气田开发材质选择标准方法

      8. RP0169-2002, Control of External Corrosion on Underground or Submerged Metallic Piping Systems
      RP0169-2002, 埋地或水下金属管线系统外腐蚀控制的推荐作法

      9. RP0285-2002, Corrosion Control of Underground Storage Tank Systems by Cathodic Protection
      RP0285-2002, 应用阴极;た刂频叵麓⒐尴低车母

      10. RP0502-2002, Pipeline External Corrosion Direct Assessment Methodology
      RP0502-2002, 管道外壁腐蚀直接评价方法的推荐作法

      11. TM0172-2001, Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines
      TM0172-2001, 石油产品管道运输腐蚀性能的测定

      12. RP0296-2004, Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum refinery Pressure Vessels in Wet H2S Environments
      RP0296-2004, 检测、修补和缓解炼厂压力容器在湿H2S环境下发生开裂的指导准则的推荐做法

      13. RP0196-2004, Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
      RP0196-2004, 钢制储水罐浸水内表面牺牲阳极阴极;さ耐萍鲎龇

      14. RP0388-2001, Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
      RP0388-2001, 碳钢储水罐浸水内表面强制电流阴极;さ耐萍鲎龇

      15. SP0208-2008, Internal Corrosion Direct Assessment Methodology for Liquid Petroleum Pipelines

      SP0208-2008, 液体石油管钱内部腐蚀的直接评估方法

      16. SP0110-2010, Wet Gas Internal Corrosion Direct Assessment Methodology for Pipelines
      SP0110-2010, 湿天然气管道内腐蚀直接评估方法

      17. SP0210-2010, Pipeline External Corrosion Confirmatory Direct Assessment
      SP0210-2010, 管道外腐蚀直接验证评估

      18. SP0207-2007, Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines
      SP0207-2007, 埋地或水下管道密间隔电位法与直流电位梯度法检测操作规程

      19. SP0177-2007, Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems
      SP0177-2007, 减轻交流电和雷电对金属构筑物和腐蚀控制系统影响的措施

      20. NACE No. 1/SSPC-SP 5, White Metal Blast Cleaning
      NACE No. 1/SSPC-SP 5, 白金属级喷砂清理

      21. NACE No. 10/SSPC-PA 6, Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks
      NACE No. 10/SSPC-PA 6, 玻璃纤维增强塑料(FRP)衬里应用于碳钢地上储油罐底

      22. NACE No. 2/SSPC-SP 10, Near-White Metal Blast Cleaning
      NACE No. 2/SSPC-SP 10, 近白级喷砂除锈

      23. NACE No. 4/SSPC-SP 7, Brush-Off Blast Cleaning
      NACE No. 4/SSPC-SP 7, 刷除喷砂清理

      24. NACE No. 12/AWS C,2.23M/SSPC-CS 23, Specification for the Application of Thermal Spray Coatings (Metalizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
      NACE No. 12/AWS C,2.23M/SSPC-CS 23, 热喷涂锌铝及其合金为钢铁耐腐蚀;さ氖┕ぜ际豕娣

      25. NACE No. 3/SSPC-SP 6, Commercial Blast Cleaning
      NACE No. 3/SSPC-SP 6, 商业喷射清理

      26. NACE No. 6/SSPC-SP 13, Surface Preparation of Concrete
      NACE No. 6/SSPC-SP 13, 混凝土基材表面处理

      27. RP0287-2002, Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape
      RP0287-2002, 对磨料喷砂清理后的钢材表面轮廓用复制带方法进行表面轮廓现场测量

      28. RP0288-2004, Inspection of Linings on Steel and Concrete
      RP0288-2004, 检验钢和混凝土上的涂层

      29. SP0102-2010, In-Line Inspection of Pipelines
      SP0102-2010, 管道在线检测的标准做法

      30. SP0108-2008, Corrosion Control of Offshore Structures by Protective Coatings
      SP0108-2008, 使用防护涂层对海上平台结构进行防腐蚀控制

      31. SP0109-2009, Field Application of Bonded Tape Coatings for External Repair, Rehabilitation, and Weld Joints and Buried Metal Pipelines
      SP0109-2009, 用于埋地金属管道外修补、修复和补口的胶带防腐层现施工的标准做法

      32. SP0206-2006, Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas
      SP0206-2006, 干气管道内腐蚀直接评价标准

      33. SP0472-2010, Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

      SP0472-2010, 在石油炼厂腐蚀环境中防止碳钢焊缝开裂控制措施的标准做法

      34. SP0572-2007, Design, Installation, Operation, and Maintenance of Impressed Current Deep Anode Beds
      SP0572-2007, 外加电流深井阳极床的设计,安装,操作和维护的标准做法

      35. TM0109-2009, Aboveground Survey Techniques for the Evaluation of Underground Pipeline Coating Condition
      TM0109-2009, 地上检测技术评定地下管道涂层情况的测试方法

      36. Report NACE 6A192/SSPC-TR 3 (2000 Edition), Dehumidification and Temperature Control During SurfacePreparation, Application, and Curing for Coatings/Linings of SteelTanks, Vessels, and Other Enclosed Spaces
      NACE 6A192/SSPC-TR 3报告 (2000版), 钢结构罐体,管道和其他封闭环境在表面预处理,喷涂和固化保养过程中的除湿和温度控制

      硫化物应力腐蚀开裂,硫化物应力开裂,硫化物应力腐蚀,硫化物应力腐蚀破裂,石油炼制与化工,石油炼制与化工期刊,石油炼制,石油炼制工程,石油炼制工艺学
      钢号 提供试验报告 产地 销售咨询电话
      Q245R(HIC)/Q245R(R-HIC) HIC报告/SSCC报告 舞阳钢铁
      新余(新钢)
      兴澄特钢
      电话:0375-8201666
      Q345R(HIC)/Q345R(R-HIC) HIC报告/SSCC报告 手机:18937583775
      SA516Gr60/70(HIC)/SA516Gr60/70(R-HIC) HIC报告/SSCC报告 手机:13837130337
      上一篇: 沸腾钢板与镇静钢板的差异,低合金钢板属于那一种分类?舞钢市金泉汇物资,舞钢市庆隆物资,新余钢铁股份武汉分公司
      下一篇: 河北钢铁舞钢公司大厚度高级别水电钢板S550Q-Z35中国钢铁新闻网,钢铁舞钢大厚度高级别水电钢板S550Q-Z35,舞钢市中冶机械有限公司
       
      地址:舞钢市钢城大道钢城花园1号楼商务楼 电话:0375-8201666 传真:0375-8201702 E-mail:hncsgt@126.com
      Copyright © 2010-2015 hncsgt.Com All Rights Reserved 版权所有 河南昌申钢铁有限公司 豫ICP证301408291
      博友彩票